HALO AC refrigerant gas leak detector

Smart Sensor Refrigerant Leak detector / sniffer for all refrigerant gases.

You can find other cheaper gas detectors but this gas sniffer is the most advanced detector on the market. You wont find any better.

If you assume that there is a gas leak you will need to find it. The best way is to use a leak detector. There are few different ways to locate the source of the refrigerant leak. It is super sensitive to detect a range HCFC, HFC and HFO refrigerant gases. There are multiple sensitivity levels that can be adjusted. Audible signal alerts you when the sniffer detected a refrigerant as the concentration increases. The leak detector is responds to changes in gas concentration of refrigerant so the detector will stop alarming even though when it's held at or near to the source of the leak and will not start again until the detector sensor detects change in concentration again. To determine the exact location of the source of the leak move the probe away from the area of the leak briefly to allow the leak detector to reset at a lower concentration and then bring it back again until the exact location of the leak source has been verified.

You can setup 2 different PPM alarm level from 0 to 1000!

* Large LCD display

* 1000mA/h rechargeable battery

* Long cable

* Flexible arm/neck

* Charging cable

* Mains adaptor (with UK adaptor included)

All halogen (including chlorine and fluorine) refrigerants can be detected. Including but not limited to

CFCS eg. R12, R11, R500, R503 etc..

HCFCS eg. R22, R123, R124.R502 etc..

HFCS eg. R134a, R404a, R125 etc..

It can also detect other mixtures, such as AZ-50, HP62, MP39, etc ...

Ethylene vapour leak detection hospital sterilising equipment.

Most of the gases can also be detected containing fluorine and bromine gas (halogen gas), carbon tetra-chloride, halon gas of fire extinguishing systems.
User manual will be sent with the sniffer.