R404a R410a R134a R32 Refrigerant Gauge kit

Features:

* The gauge scale is for R32, R410a, R134a and R407c refrigerants. (No R404a marking on gauge but it is compatible with it.)

* Incredible 70inch (1.75 meter) long hose. 

* All fittings included to connect/maintain most Split A/C units!

(PLEASE NOTE THAT THE GAUGE SCALE DOES NOT SHOW R22 AND R404A SCALES!)  

**Refrigeration manifolds

**2 way valves aluminium alloy manifolds with sight glass

**3pcs charging hoses with 1/4" SAE

**Length of charging hoses is 1.75 meter.

**for Refrigerant R134a equipped with automotive QC-19L & QC-19H quick coupler

**Portable plastic case packed

**Valve removal tool

**No English user manual included

+ R22 Imperial adapter

+ R22 Metric adapter

+ R410a adapter

+ R32 adapter

+ Tee fitting with depressor on the female nut end.

+ R32 cylinder adaptor with 1/4" male end (fit also other flammable refrigerant cylinders)

+ R134a, R410a cylinder adaptor with 1/4" male end (fit also other non-flammable refrigerant cylinders)

+ All canister tap valve (silver color) (It can also be used for R600a cansiters)

+ 7/16" R600a tap valve (red color - please make sure that your canister has 7/16" thread on the canister)

+ M14 R134a tap valve (green color)

+ 1/4", 3/8", 3/16" and 5/16" square ratchet wrench

+ 4mm, 3/16", 5/16" hexagon bits + hex ratchet wrench

+ 2x solderable access port with 1/4" male end and Schrader valve fitted.

+ 1x bullet piercing valve with 1/4" male end

+

45º ECCENTRIC CONE FLARING TOOL KIT IN PLASTIC CASE 

The clamp can handle 12 different tube sizes. 

For tubes 1/4", 5/16", 3/8", 1/2", 5/8", 3/4" and 6mm, 8mm, 10mm, 12mm, 16mm and 19mm.

 Easy operation, save time and energy. The special cone eccentric revolution will be allows the internal opening gradually and form 45º accurate and regular flare without, preventing tube slippage downward. Therefore, the flare face will be smooth, uniform without scratching. 

Eccentric cone will be rebound by itself after the work is finished,make the idle top head in revolution again for 1-2 rounds and have the flare face in friction to make it prettier.

Included: 

+CT274 - tube cutter for 1/8" to 1-1/8" (from 4 to 28mm) 

+BT208 - Inner-Outer Reamer from 3/16" to 1-1/2" (up to 40mm inner diameter).

+

Rotary vane vacuum pump.

High Efficiency and Low Noise

Heavy-duty Aluminum Alloy Casing

With Oil Drain Plug Positioned at Bottom of Oil Reservoir

Internal High Volume Cooling Fan For Extended Use

Exhaust Port with Exhaust Cap

Direct Drive Motor Allowing Easy Starting and is Maintenance Free

Oil Sight Glass For Monitoring Oil Levels

ON/OFF Switch

Non Slip Cushion Handle

1 bottle if compressor oil is included.

SPECS: 

Voltage /Frequency: 220V-240V/60HZ

UK plug

Flow Rate: 51 L/MIN (1.8 CFM)

Ultimate Vacuum: 5 Pa (0.05mbar)

RPM: 1400 RPM

Power: 1/4HP

Oil Capacity: 300 ml

Dimension: 10 1/2" x 4 1/2" x 8 1/2 

1 year warranty.

* When you receive the kit please fill it with vacuum pump oil first and DO NOT run dry!

* Express shipping is available.